| FS10: | Domain validation error. The record "%1%" contains illegal characters - or - the data does not pass validation patterns specified in the dictionary. |
| FS11: | Error attempting to convert or validate data in the "%1%" column. Check dictionary conversion and validation patterns. |
| FS12: | The record does not pass reduction criteria. |
| FS13: | Unable to lock this table or record. This lock is being held by another station. |
| FS14: | The operating system has denied access to this table or record. A table or record lock is being held by another station. |
| FS15: | Domain Error: Attempt to write NULL value into column "%1%". |
| FS16: | Domain Error: Attempt to write too many characters into column "%1%" (maximum: %2%). |
| FS17: | Domain Error: Value for column "%1%" does not conform to domain rule: %2%. |
| FS18: | Domain Error: Error converting value for column "%1%", by format: %2%. |
| FS30: | Number of fields in record is greater than the number of table columns. |
| FS50: | Error while updating or deleting the dictionary record "%1%". The table structure cannot be modified while the data table contains data. |
| FS51: | Dictionary domain error. The dictionary record "%1%" does not conform to the foreign table attribute specifications defined for this table type. |
| FS52: | The name "%2%" is an invalid foreign table name for the "%1%" table. |
| FS53: | You have attempted to define too many master fields. The maximum allowable is %1%, but you have attempted to define %2%. |
| FS54: | The fields have not been defined in field position order. The following field position(s) are missing: %1% |
| FS55: | No master fields have been defined -- unable to create the table. |
| FS56: | The data table cannot be created unless the dictionary exists. |
| FS57: | The dictionary record "%1%" has a foreign field name "%2%" that has already been used in another dictionary record. |
| FS100: | Record "%1%" does not exist. |
| FS101: | Write error. The operating system table "%1%" does not exist. |
| FS102: | Error while writing data. "%1%" is a read-only table. |
| FS103: | Error in the operating system table "%1%". Disk volume full. |
| FS104: | General write error in the operating system table "%1%". |
| FS105: | Read error in the operating system table "%1%". The table does not exist or the tablename is not valid for the operating system. |
| FS106: | Access denied by the operating system to the "%1%" table. |
| FS107: | Read error. OS Table = "%1%". |
| FS109: | Open or Create Media error. The name "%1%" is an invalid volume directory label. |
| FS110: | Open table error. The handle "%1%" is invalid for a volume directory. |
| FS111: | No more records available. |
| FS112: | The %1% filing system cannot be installed. |
| FS113: | The filing system RTP59 cannot be installed. (RTP57 must be installed beforehand.) |
| FS114: | The filing system RTP50 cannot be installed. The entry "MEMORY.RESIDENT" cannot be made in the "SYSVOLUMES" table. |
| FS115: | The filing system RTP50 cannot be installed. No entry can be made in the "SYSVOLUMES" table. |
| FS116: | The filing system RTP50 cannot be installed. No entry can be made in the "SYSTABLES" table. |
| FS124: | Group Format Error: OS File : %1% Group # : %2% Reading the next frame in the current group has failed. |
| FS125: | Group Format Error! OS File : %1% Group # : %2% A record has been truncated across frame boundaries. |
| FS126: | Group Format Error: OS File : %1% Group # : %2% Wrong Overflow frame linked to group. |
| FS127: | Group Format Error: OS File : %1% Group # : %2% Record length incorrect or frame linkage error. |
| FS128: | Linear Hash Error: OS File : %1% Group # : %2% LNP incorrect - modulo corrupted in group 0 header. |
| FS129: | Linear Hash Error OS File: %1% Group #: %2% Group Calculation Error. |
| FS130: | The BFS code %1% has not been implemented in the BFS "%2%". |
| FS133: | Undefined error during a read/write/delete operation. OS File : %1% Status(): %2% |
| FS135: | Generic %1% Server Error||Error code: %2%||%3%| |
| FS140: | Unable to create the "%1%" table. There are too many fields defined. |
| FS141: | Unable to create the "%1%" table. Position number %2% in the dictionary is missing. |
| FS142: | The record "%2%" cannot be saved in the "%1%" table because it contains invalid data. |
| FS143: | Unable to create the "%1%" table. The dictionary is missing. |
| FS144: | Record "%2%" is missing from the "%1%" table. |
| FS145: | The "%1%" table does not exist. |
| FS146: | The "%1%" table already exists. |
| FS147: | Unable to create the table. The specified table attributes are not valid. |
| FS148: | The record key "%2%" is invalid for the "%1%" table. |
| FS149: | The "%1%" table is protected and cannot be deleted. |
| FS150: | The "%1%" table is too long. (Tables must be less than 65,530 characters.) |
| FS151: | ROS table error. The record "%1%" has made a frame longer than 65,650 characters. The frame cannot be saved. |
| FS152: | The control record "%RECORDS%" is too long to be saved. The current record length is %1% characters. |
| FS160: | Insufficient memory. %1% characters are required, but only %2% characters are available |
| FS161: | Too many locks have been attempted. The lock table for the Linear Hash table type has overflowed. |
| FS171: | Warning! Incorrect version of DOS -- use DOS 3.1 or higher. You will not be able to lock tables or records. Use only local tables or reboot using a correct version of DOS. |
| FS172: | Warning! The locktable "REVBOOT" is not available. You will not be able to lock tables or records. Correct the condition or use only local tables. |
| FS173: | Warning! The station identifier cannot be found. You will not be able to lock tables or records. Use only local tables or log out and correct the condition. |
| FS174: | Warning! No network drive can be found. Either the drive is local or no network drive is configured. You will not be able to lock tables or records. Use only local tables or log out and correct the condition. |
| FS175: | Warning! The network shell is not loaded. Interrupt 60 (Hex) has not been initialized. You will not be able to lock tables or records. Use only local tables or log out and establish a network connection. |
| FS176: | Warning! NetWare is not responding. The server is inactive or your workstation shell has not been loaded. You will not be able to lock tables or records. Use only local tables or log out and check your network connection. |
| FS185: | Warning! The current network driver is for non-networking purposes only and will not function properly on a network. Data corruption may result! Log out and correct the condition. |
| FS186: | Warning! The locktable "REVBOOT" is not available. You will not be able to lock tables or records. Data corruption may result! Log out and correct the situation. |
| FS187: | Warning! The station/process ID cannot be found. You will not be able to lock tables or records. Data corruption may result! Log out and correct the situation. |
| FS188: | Warning! SHARE.EXE has not been loaded. You will not be able to lock tables or records. Data corruption may result! Log out and correct the situation |
| FS189: | Warning! The current network driver does not support local locking. Data corruption may result if you run more than one OpenInsight from this workstation at the same time. |
| FS190: | Warning! The Banyan VINES Service Interrupt was not found. You will not be able to lock tables or records. Do not attempt multi-user operation. |
| FS191: | Warning! The BANCOM TSR was not found. You will not be able to lock tables or records. Do not attempt multi-user operation. |
| FS192: | Warning! The user's VINES StreetTalk name was not found. You will not be able to lock tables or records. Do not attempt multi-user operation. |
| FS193: | Warning! An error was encountered while opening the VINES Communications Socket. You will not be able to lock tables or records. Do not attempt multi-user operation. |
| FS194: | Warning! An error was encountered while initializing the network driver. You will not be able to lock tables or records. Do not attempt multi-user operation. |
| FS195: | Warning! No lock services were connected. You will not be able to lock tables or records. Do not attempt multi-user operation. |
| FS196: | Warning! An error was encountered while connecting the lock service for drive %1%. You will not be able to lock tables or records. Do not attempt multi-user operation. |
| [top] | |
